Hydraulic Press
Repair . Spare parts
Production
Supply of spare parts
Repair and modernization
«Volev» company produces equipment complexes for pressing tablet briquettes.
Complex includes: dosing device for dosed charge loading into the matrix, hydraulic press 250 kN for briquette compression, conveyor for transporting briquettes from the pressing zone, hydraulic drive and electric equipment.
Equipment is made on the basis of a modern, standard hydraulic, pneumatic and electrical devices. Under the operation, in terms of the impact of climatic environmental factors, the equipment is valid for the УХЛ4.2 by State Standard 15150-69 and designed for use in enclosed areas with air temperatures no more than 35°C and not less than 10°C.
|
№ | Name |
Data |
| 1
2
3 4
5 6 7 8 9 10
11 | Operating Modes
Dimensions of briquette, mm - diameter - height Cycle of briquette producing. no more than, sec The working body in a pneumatic system - compressed air, purified not coarser than 12th grade of purity by State Standard 17433-87, with relative humidity at 20°C not more than 60%
Operating air pressure, MPa Air flow, m3/h Established capacity of equipment, kW Voltage of electric current in power circuits, V Voltage of electric current in control circuits, V Dimensions of the equipment set, mm - left - right - front - back - maximum height above the floor level
Weight of the equipment, kg
| commissioning manual semi-automatic automatic 44 17 40*
0,8…1 8 380 24
2810 2790 1660
|