Hydraulic Press
Repair . Spare parts
Production
Supply of spare parts
Repair and modernization
Our company produces storey presses for production of industrial rubber goods. Number of storeys, as well as the size of the heating plates may be different. Design of the heating plate allows the use of different types of heat - induction heating, heating by tubular electric heaters, etc.
Temperature difference on the surface of the plate does not exceed ± 2,5 ° C.
Below is shown one of the options of such press and it`s technical characteristics.
| 1 | Press force, kN | 1000 |
| 2 | Number of storeys | 2 |
| 3 | Heating plate size, mm | 400х400 |
| 4 | Interval between the plates, mm | 130 |
| 5 | Maximum temperature ° C | 200 |
| 6 | Plates heating - Electric, Individual | |
| 7 | Pressure in the main cylinders, MPa | 200 |
| 8 | Maximum cylinder stroke, mm | 200 |
| 9 | Hydraulic drive – individual pumping | |
| 10 | Height above floor level, mm | 1800 |
| 11 | Dimensions: Width, mm; Depth, mm | 1260; 1200 |
| 12 | Established capacity, kW Including induction heating of plates, kW | 21.5 |
| 13 | Mass, kg | 1995 |